+1 888 608-7511
Need help finding a standard?
Help Desk
Standard Specification for Seamless Brass Tube
This specification covers seamless round and rectangular including square copper alloy tube in straight lengths.
The following copper alloys are specified and classified according to their nominal compositions: UNS No. C22000, UNS No. C23000, UNS No. C26000, UNS No. C27000, UNS No. C27200, UNS No. C27400, UNS No. C28000, UNS No. C33000, UNS No. C33200, UNS No. C37000, and UNS No. C44300.
The tempers of drawn tube shall be designated as light-drawn (H55), drawn (H58), and hard-drawn (H80).
Light-drawn (bending) temper is used only when a tube of some stiffness but yet capable of being bent is needed.
Drawn temper is for general purposes and is most commonly used where there is no specific requirement for high strength on the one hand or for bending qualities on the other.
Hard-drawn temper is used only where there is need for a tube as strong as is commercially feasible for the sizes indicated.
For any combination of diameter and wall thickness not covered under hard-drawn temper, the values given for drawn temper shall be used.
The tempers of annealed tube shall be designated as light anneal (O50) and soft anneal (O60).
The tubes shall undergo mechanical tests such as:
A mercury nitrate test shall be done to detect and remove mercury vapor.
Nondestructive tests such as:
1.1 This specification establishes the requirements for seamless round and rectangular including square copper alloy tube in straight lengths.
Ten alloys are specified having the following nominal compositions:
|
Copper |
Nominal Composition, % |
|||
|
Alloy |
|
|
|
|
|
UNS No.2 |
Copper |
Zinc |
Lead |
Tin |
|
|
|
|
|
|
|
C22000 |
90.0 |
10.0 |
... |
... |
|
C23000 |
85.0 |
15.0 |
... |
... |
|
C26000 |
70.0 |
30.0 |
... |
... |
|
C27000 |
65.0 |
35.0 |
... |
... |
|
C27200 |
63.0 |
37.0 |
... |
... |
|
C27400 |
62.5 |
37.5 |
... |
... |
|
C28000 |
60.0 |
40.0 |
||
Failed to load document history.
| Publish Date | Document Id | Type | View |
|---|