ASTM B543/B543M-26

Current Revision
Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube

Best Price Guarantee Oct 1, 2026 English 12 Pages


Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM International Logo

ASTM B543/B543M-26

Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube

PUBLISH DATE 2026
PAGES 12
ASTM B543/B543M-26

This specification covers welded tube of specific copper and various copper alloys of a limited range of diameters, for use in surface condensers, evaporators, heat exchangers, and general engineering applications.

The product shall be manufactured by forming the material into a tubular shape on a suitable forming mill. Welding of tube shall be accomplished by forge-welding, fusion-welding, or full finishing that produces a forge weld leaving no crevice in the weld seam visible to the unaided eye.

The tube shall conform to tensile strength and yield strength requirements, and shall be subject to expansion, flattening, and reverse bend tests. Mercurous nitrate or ammonia vapor tests shall be required only for selected UNS Numbers of Copper Alloys.

Each tube shall be subjected to eddy-current, hydrostatic, and pneumatic tests.

1.1Β This specification covers the requirements for welded tube of copper and various copper alloys up to 31/8Β in., inclusive, in diameter, for use in surface condensers, evaporators, heat exchangers, and general engineering applications.

The following coppers or copper alloys are involved:

Copper or Copper Alloy UNS No.2

Type of Metal

C10800A

oxygen-free, low phosphorus

C12200A

DHP phosphorized, high residual phosphorus

C19400

copper-iron alloy

C23000

red brass

C44300

arsenical admiralty

C44400

antimonial admiralty

C44500

phosphorized admiralty

C68700

arsenical aluminum brass

C70400

95-5 copper-nickel

C70600

90-10 copper-nickel

C70620

90-10 copper-nickel (modified for welding)

C71000

80-20 copper-nickel

C71500

70-30 copper-nickel

C71520

70-30 copper-nickel (modified for welding)

C71640

copper-nickel-iron-manganese

C72200

...

1.2Β The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets.

The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

1.3Β The following safety hazard caveat pertains only to the test method(s) described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

Warningβ€” Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials.

Use caution when handling mercury and mercury-containing products. See the applicable product Safety Data Sheet (SDS) for additional information. The potential exists that selling mercury or mercury-containing products, or both, is prohibited by local or national law. Users must determine legality of sales in their location.

1.4

20.1Β For purposes of determining compliance with the specified limits for requirements of the properties listed in the following table, an observed value or a calculated value shall be rounded as indicated in accordance with the rounding method of Practice E29.

The table below specifies the Rounded Unit for Observed or Calculated Value corresponding to each Property:

  • Chemical composition: nearest unit in the last righthand place  of figures
  • Tensile strength and yield strength: nearest ksi (Nearest 5 MPa)
  • Grain size: Up to 0.055 mm, incl, Over 0.055 mm β€” nearest multiple of 0.005 mm to the nearest 0.010 mm
  • Expansion: nearest 1 %
Loading...

Failed to load document history.

Publish Date Document Id Type View