ASTM C311/C311M-26

Current Revision
Standard Test Methods for Sampling and Testing Coal Ash or Natural Pozzolans for Use in Concrete

Best Price Guarantee Jun 15, 2026 English 11 Pages


Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM International Logo

ASTM C311/C311M-26

Standard Test Methods for Sampling and Testing Coal Ash or Natural Pozzolans for Use in Concrete

PUBLISH DATE 2026
PAGES 11
ASTM C311/C311M-26

1.1 These test methods cover procedures for sampling and testing coal ash and raw or calcined pozzolans for use in concrete.

1.2 The procedures appear in the following order:

Sampling Sections 7
CHEMICAL ANALYSIS
Reagents and apparatus 10
Moisture content 11 and 12
Loss on ignition 13 and 14
Silicon dioxide, aluminum oxide, iron oxide, calcium oxide, magnesium oxide, sulfur trioxide, sodium oxide and potassium oxide 15
Ammonia 16
PHYSICAL TESTS
Density 17
Fineness 18
Increase of drying shrinkage of mortar bars 19 – 21
Air-entrainment of mortar 22 and 23
Strength activity index 24 – 27
Water requirement 28
Effectiveness of Coal Ash or Natural Pozzolan in Contributing to Sulfate Resistance 29

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

Note 1: Sieve size is identified by its standard designation in Specification E11. The alternative designation given in parentheses is for information only and does not represent a different standard sieve size.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5 The text of this standard references notes and footnotes that provide explanatory information. These notes and footnotes (excluding those in tables) shall not be considered as requirements of this standard.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

4.1 These test methods are used to develop data for comparison with the requirements of Specification C618 or Specification C1697. These test methods are based on standardized testing in the laboratory and are not intended to simulate job conditions.

4.1.1 Strength Activity Index— The test for strength activity index is used to determine whether coal ash or natural pozzolan results in an acceptable level of strength development when used in concrete. Since the test is performed with mortar, the results may not provide a direct correlation of how the coal ash or natural pozzolan will contribute to strength in concrete.

4.1.2 Chemical Tests— The chemical component determinations and the limits placed on each do not predict the performance of a coal ash or natural pozzolan in concrete, but collectively help describe composition and uniformity of the material.

Loading...

Failed to load document history.

Publish Date Document Id Type View