ASTM C474-15(2020)

Current Revision
Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction

Best Price Guarantee Jun 1, 2020 English 15 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM International Logo

ASTM C474-15(2020)

Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction

PUBLISH DATE 2020
PAGES 15
ASTM C474-15(2020)

These test methods cover the physical testing of joint treatment materials such as joint compound, paper joint tape, glass-mesh joint tape, and an assembly of joint compound and paper joint tape. These materials are used in gypsum board construction.

The test methods are detailed for the following:

  • Joint compound tests β€” for viscosity, shrinkage, check cracking, and putrefaction;
  • Joint tape tests β€” for tensile strength, width, and thickness;
  • Paper joint tape tests β€” for dimensional stability;
  • Assemblages of paper joint tape and joint compound β€” for bond of paper joint tape to joint compound and cracking of joint compound at tape edges; and
  • Glass-mesh joint tape test β€” for skewness.

1.1Β These test methods cover the physical testing of joint compound, paper joint tape, glass-mesh joint tape, and an assembly of joint compound and paper joint tape.

1.1.1Β Joint treatment materials are specified in Specification C475/C475M.

1.1.2Β The joint treatment material described in this standard are for use with gypsum board installed in accordance with Specification C840.

1.2Β The test methods appear in the following order:

  • Joint Compound Tests:
    • Viscosity β€” see Section 5
    • Shrinkage β€” see Section 6
    • Check Cracking β€” see Section 7
    • Putrefaction β€” see Section 8
  • Joint Tape Tests:
    • Tensile Strength β€” see Section 9
    • Width β€” see Section 10
    • Thickness β€” see Section 11
  • Paper Joint Tape Tests:
    • Dimensional Stability β€” see Section 12
  • Assemblages of Paper Joint Tape and Joint Compound:
    • Cracking of Joint Compound at Tape Edges β€” see Section 14
    • Bond of Paper Joint Tape to Joint Compound β€” see Section 15
  • Glass-Mesh Joint Tape Test:
    • Skewness β€” see Section 13

1.3Β The values stated in inch-pound units are to be regarded as standard. The values given in brackets are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4Β The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

1.5Β This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6Β This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Loading...

Failed to load document history.

Publish Date Document Id Type View