ASTM C67/C67M-26

Current Revision
Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

Best Price Guarantee Aug 1, 2026 English 21 Pages


Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM International Logo

ASTM C67/C67M-26

Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

PUBLISH DATE 2026
PAGES 21
ASTM C67/C67M-26

These test methods cover procedures for the sampling and testing of brick and structural clay tile.

The tests include modulus of rupture, compressive strength, absorption, saturation coefficient, effect of freezing and thawing, efflorescence, initial rate of absorption, and determination of weight, size, warpage, length change, and void areas.

For purposes of these tests, full-size bricks, tiles, or solid masonry units shall be used as test specimens.

They shall be representative of the lot of units from which they are to be selected in respect of the range of colors, textures, and sizes and shall be free of or brushed to remove dirt, mud, mortar, or other foreign materials unassociated with the manufacturing process.

1.1Β These test methods cover procedures for the sampling and testing of brick and structural clay tile. Although not necessarily applicable to all types of units, tests include modulus of rupture, compressive strength, absorption, saturation coefficient, effect of freezing and thawing, efflorescence, initial rate of absorption and determination of weight, size, warpage, length change, and void area. (Additional methods of test pertinent to ceramic glazes include imperviousness, chemical resistance, opacity, and resistance to crazing.)

1.2Β The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

Note 1:Β The testing laboratory performing this test method should be evaluated in accordance with Practice C1093.

1.3Β The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

1.4Β These test methods include the following sections:

  • Scope – Section 1
  • Referenced Documents – Section 2
  • Terminology – Section 3
  • Sampling – Section 4
  • Specimen Preparation – Section 5
  • Modulus of Rupture (Flexure Test) – Section 6
  • Compressive Strength – Section 7
  • Absorption – Section 8
  • Freezing and Thawing – Section 9
  • Initial Rate of Absorption (Suction) (Laboratory Test) – Section 10
  • Efflorescence – Section 11
  • Weight Per Unit Area – Section 12
  • Measurement of Size – Section 13
  • Measurement of Warpage – Section 14
  • Measurement of Length Change – Section 15
  • Initial Rate of Absorption (Suction) (Field Test) – Section 16
  • Measurement of Void Area in Cored Units – Section 17
  • Measurement of Void Area in Deep Frogged Units – Section 18
  • Measurement of Out of Square – Section 19
  • Measurement of Shell and Web Thickness – Section 20
  • Breaking Load – Section 21
  • Imperviousness Test (of Ceramic Glazes) – Section 22
  • Chemical Resistance Test (of Ceramic Glazes) – Section 23
  • Autoclaved Crazing Test (of Ceramic Glazes) – Section 24
  • Opacity Test (of Ceramic Glazes) – Section 25
  • Precision and Bias – Section 26
  • Keywords – Section 27
  • Safety Precautions for Autoclave Equipment and Operation – Appendix X1

1.5Β This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6Β This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Loading...

Failed to load document history.

Publish Date Document Id Type View