ASTM C698-24

Current Revision
Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O<inf>2</inf>)

Best Price Guarantee Dec 1, 2024 English 22 Pages


Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM International Logo

ASTM C698-24

Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O<inf>2</inf>)

PUBLISH DATE 2024
PAGES 22
ASTM C698-24

1.1 These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade mixed oxides, (U, Pu)O2, powders and pellets to determine compliance with specifications.

1.2 The analytical procedures appear in the following order:

  • Uranium in the Presence of Pu by Potentiometric Titration - Sections 2
  • Plutonium by Controlled-Potential Coulometry - Sections 2
  • Plutonium by Amperometric Titration with Iron (II) - Sections 2
  • Nitrogen by Distillation Spectrophotometry Using Nessler Reagent - Sections 8 to 15
  • Carbon (Total) by Direct Combustion-Thermal Conductivity - Sections 16 to 26
  • Total Chlorine and Fluorine by Pyrohydrolysis - Sections 27 to 34
  • Sulfur by Distillation-Spectrophotometry - Sections 35 to 43
  • Moisture by the Coulometric, Electrolytic Moisture Analyzer - Sections 44 to 51
  • Isotopic Composition by Mass Spectrometry - Sections 3
  • Rare Earths by Copper Spark Spectroscopy - Sections 4
  • Trace Impurities by Carrier Distillation Spectroscopy - Sections 4
  • Impurities by Spark-Source Mass Spectrography - Sections 4
  • Total Gas in Reactor-Grade Mixed Dioxide Pellets - Sections 5
  • Tungsten by Dithiol-Spectrophotometry - Sections 52 to 60
  • Rare Earth Elements by Spectroscopy - Sections 4
  • Plutonium-238 Isotopic Abundance by Alpha Spectrometry - Sections 6
  • Americium-241 in Plutonium by Gamma-Ray Spectrometry
  • Uranium and Plutonium Isotopic Analysis by Mass Spectrometry - Sections 61 to 69
  • Oxygen-to-Metal Atom Ratio by Gravimetry - Sections 70 to 77

1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (For specific safety precaution statements, see Sections 6, 13.2.5, 41.7, and 65.6.1.)

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

1.1 These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade mixed oxides, (U, Pu)O2, powders and pellets to determine compliance with specifications.

1.2 The analytical procedures appear in the following order:

  • Uranium in the Presence of Pu by Potentiometric Titration — Sections 2
  • Plutonium by Controlled-Potential Coulometry — Sections 2
  • Plutonium by Amperometric Titration with Iron (II) — Sections 2
  • Nitrogen by Distillation Spectrophotometry Using Nessler Reagent — Sections 8 to 15
  • Carbon (Total) by Direct Combustion-Thermal Conductivity — Sections 16 to 26
  • Total Chlorine and Fluorine by Pyrohydrolysis — Sections 27 to 34
  • Sulfur by Distillation-Spectrophotometry — Sections 35 to 43
  • Moisture by the Coulometric, Electrolytic Moisture Analyzer — Sections 44 to 51
  • Isotopic Composition by Mass Spectrometry — Sections 3
  • Rare Earths by Copper Spark Spectroscopy — Sections 4
  • Trace Impurities by Carrier Distillation Spectroscopy — Sections 4
  • Impurities by Spark-Source Mass Spectrography — Sections 4
  • Total Gas in Reactor-Grade Mixed Dioxide Pellets — Sections 5
  • Tungsten by Dithiol-Spectrophotometry — Sections 52 to 60
  • Rare Earth Elements by Spectroscopy — Sections 4
  • Plutonium-238 Isotopic Abundance by Alpha Spectrometry — Sections 6
  • Americium-241 in Plutonium by Gamma-Ray Spectrometry
  • Uranium and Plutonium Isotopic Analysis by Mass Spectrometry — Sections 61 to 69
  • Oxygen-to-Metal Atom Ratio by Gravimetry — Sections 70 to 77

1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (For specific safety precaution statements, see Sections 6, 13.2.5, 41.7, and 65.6.1.)

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

4.1 Mixed oxide, a mixture of uranium and plutonium oxides, is used as a nuclear-reactor fuel in the form of pellets. The plutonium content may be up to a mass fraction of 10 %, and the diluent uranium may be of any 235U enrichment.

In order to be suitable for use as a nuclear fuel, the material must meet certain criteria for combined uranium and plutonium content, effective fissile content, and impurity content as described in Specification C833.

4.1.1 The material is assayed for uranium and plutonium to determine whether the plutonium content is as specified by the purchaser, and whether the material contains the minimum combined uranium and plutonium contents specified on a dry mass basis.

4.1.2 Determination of the isotopic content of the plutonium and uranium in the mixed oxide is made to establish whether the effective fissile content is in compliance with the purchaser's specifications.

4.1.3 Impurity content is determined to ensure that the maximum concentration limit of certain impurity elements is not exceeded. Determination of impurities is also required for calculation of the equivalent boron content (EBC) as described in Practice C1233.

4.2 Fitness for Purpose of Safeguards and Nuclear Safety Applications—Methods intended for use in safeguards and nuclear safety applications shall meet the requirements specified by Guide C1068 for use in such applications.

Loading...

Failed to load document history.

Publish Date Document Id Type View