ASTM D1039-16(2022)

Current Revision
Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation

Best Price Guarantee May 1, 2022 English 7 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM D1039-16(2022) PDF Preview
ASTM D1039-16(2022)

1.1Β These test methods cover the evaluation of the characteristics of glass-bonded, natural, or synthetic mica materials intended for use as electrical insulation.

1.2Β Glass bonded mica materials are commercially available in both injection molded and compression molded types. These test methods are applicable to both types except for tensile strength methods. (See Section 41.)

1.3Β The test methods appear in the following sections:

  • Arc Resistance: Sections 57 – 59, ASTM Test Method D495
  • Compressive Strength: Sections 33 – 35, ASTM Test Method D695
  • Conditioning: Section 5, ASTM Test Method D618
  • Dielectric Strength: Sections 48 – 51, ASTM Test Method D149
  • Dissipation Factor: Sections 43 – 47, ASTM Test Methods D150 and D2149
  • Heat Distortion Temperature: Sections 24 – 29, ASTM Test Method D648
  • Impact Resistance: Sections 36 – 39, ASTM Test Method D256
  • Modulus of Rupture: Sections 30 – 32, ASTM Test Methods D790 and C674
  • Permittivity: Sections 43 – 47, ASTM Test Methods D150 and D2149
  • Porosity: Sections 13 – 16, ASTM Test Method D116
  • Resistivity, Volume and Surface: Sections 52 – 56, ASTM Test Method D257
  • Rockwell Hardness: Sections 10 – 12, ASTM Test Method D785
  • Specific Gravity: Sections 6 – 9, ASTM Test Method D792
  • Specimens: Section 4
  • Tensile Strength: Sections 40 – 42, ASTM Test Methods D638 and D651
  • Terminology: Section 3, ASTM Test Method D1711
  • Thermal Conductivity: Sections 17 – 19, ASTM Test Methods C177 and E1225
  • Thermal Expansion: Sections 20 – 23, ASTM Test Methods E228 and E289
  • Thickness: Sections 49 and 54, ASTM Test Method D374

1.4Β The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5Β This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See also Sections 45, 49, 54, and 58.

1.6Β This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

1.1Β These test methods cover the evaluation of the characteristics of glass-bonded, natural, or synthetic mica materials intended for use as electrical insulation.

1.2Β Glass bonded mica materials are commercially available in both injection molded and compression molded types. These test methods are applicable to both types except for tensile strength methods. (See Section 41.)

1.3Β The test methods appear in the following sections:

Test Method

Section

ASTM Test Method

Arc Resistance

57 – 59

D495

Compressive Strength

33 – 35

D695

Conditioning

5

D618

Dielectric Strength

48 – 51

D149

Dissipation Factor

43 – 47

D150 and D2149

Heat Distortion Temperature

24 – 29

D648

Impact Resistance

36 – 39

D256

Modulus of Rupture

30 – 32

D790 and C674

Permittivity

43 – 47

D150 and D2149

Porosity

13 – 16

D116

Resistivity, Volume and Surface

52 – 56

D257

Rockwell Hardness

10 – 12

D785

Specific Gravity

6 – 9

D792

Specimens

4

Β 

Tensile Strength

40 – 42

D638 and D651

Terminology

6.1Β This characteristic is useful for specification purposes and has utility as a quality control parameter.

Loading...

Failed to load document history.

Publish Date Document Id Type View