Standard Specification for Rubber—Concentrated, Ammonia Stabilized, Creamed, and Centrifuged Natural Latex
This specification establishes the requirements for first grade concentrated natural rubber latex of the following categories:
This specification applies to natural latex sources other than Hevea brasiliensis but does not apply to compounded latex concentrates.
Materials shall be tested by analytical procedures that determine the following chemical properties and substances:
1.1 This specification covers requirements for first grade concentrated natural rubber latex (see Table 1) of the following categories:
Category 1—Centrifuged Hevea natural latex stabilized with ammonia only.
Category 2—Creamed Hevea natural latex stabilized with ammonia only.
Category 3—Centrifuged Hevea natural latex stabilized with low ammonia.
Category 4—Centrifuged, or centrifuged and creamed, guayule latex, or other natural rubber latex, containing less than 200 µg total protein per gram dry weight of latex, with ammonia or other hydroxide.
Category 5—Centrifuged Hevea natural latex treated with aluminum hydroxide or by other means, stabilized with ammonia only containing less than 0.5 % non-rubber content.
1.2 This specification is not necessarily applicable to latices prepared, stabilized, or preserved by other methods, and shall not be construed as limiting the desirability or usefulness of other categories of latices. It does apply to natural latex sources other than Hevea brasiliensis but does not apply to compounded latex concentrates.
1.3 The analytical procedures applicable to the specifications are included and appear in the following order:
|
Section |
|
|
Sampling |
6 and 7 |
|
Total Solids |
8 – 17 |
|
Dry Rubber Content |
18 |
|
Protein Content |
19 |
|
Total Alkalinity |
20 |
|
Viscosity |
21 |
|
Sludge Content |
22 |
|
Coagulum Content |
23 |
|
KOH Number |
24 |
|
pH |
25 |
|
Mechanical Stability |
26 |
|
Copper and Manganese |
27 |
|
Density |
28 – 40 |
|
Volatile Fatty Acids |
41 – 45 |
|
Boric Acid |
46 |
4.1 This specification denotes limits on the 5 categories of latex as defined in the scope and defines the test methods to use for the specified properties.
These test methods may be used for production control or for referee purposes.
Failed to load document history.
| Publish Date | Document Id | Type | View |
|---|