This guide describes methods of testing and specifications for electrical insulating oils of petroleum origin intended for use in electrical cables, transformers, oil circuit breakers, and other electrical apparatus where the oils are used as insulating, or heat transfer media, or both.
This guide is classified into the following categories: sampling practices, physical tests, electrical tests, chemical tests, and specifications.
The test methods shall be as follows:
- aniline point;
- coefficient of thermal expansion;
- color;
- examination;
- flash and fire point;
- interfacial tension;
- pour point of petroleum products;
- refractive index;
- relative density;
- specific heat;
- thermal conductivity;
- turbidity;
- viscosity;
- dielectric breakdown voltage;
- dissipation factor and relative permittivity;
- gassing tendency;
- resistivity;
- stability under electrical discharge;
- acidity;
- carbon-type composition;
- compatibility with construction material;
- copper content;
- furanic compounds;
- gas analysis;
- gas content;
- inorganic chlorides and sulfates;
- neutralization numbers;
- oxidation inhibitor content;
- oxidation stability;
- polychlorinated biphenyl content;
- sediment and soluble sludge;
- sulfur;
- water content;
- mineral insulating oil for electrical apparatus;
- and high firepoint electrical insulating oils.
1.1Β This guide describes methods of testing and specifications for electrical insulating liquids intended for use in electrical cables, transformers, liquid-filled circuit breakers, and other electrical apparatus where the liquids are used as insulating, or heat transfer media, or both.
1.2Β The purpose of this guide is to outline the applicability of the available test methods. Where more than one is available for measuring a given property, their relative advantages are described, along with an indication of laboratory convenience, precision, (95β% confidence limits), and applicability to specific types of electrical insulating liquids.
1.3Β This guide is classified into the following categories: Sampling Practices, Physical Tests, Electrical Tests, Chemical Tests, and Specifications. Within each test category, the test methods are listed alphabetically by property measured.
A list of standards follows:
- Sampling: Section 3 β ASTM Standard D923
- Physical Tests:
- Aniline Point, Section 4 β ASTM Standard D611
- Coefficient of Thermal Expansion, Section 5 β ASTM Standard D1903
- Color, Section 6 β ASTM Standard D1500
- Examination: Visual Infrared, Section 7 β ASTM Standards D1524, D2144, D2129
- Flash and Fire Point, Section 8 β ASTM Standard D92
- Interfacial Tension, Section 9 β ASTM Standard D971
- Pour Point of Petroleum Products, Section 10 β ASTM Standards D97, D5949, D5950
- Particle Count in Mineral Insulating Oil, Section 11 β ASTM Standard D6786
- Refractive Index and Specific Optical Dispersion, Section 12 β ASTM Standard D1218
- Relative Density (Specific Gravity), Section 13 β ASTM Standards D287, D1217, D1298, D1481, D4052
- Specific Heat, Section 14 β ASTM Standard D2766
- Thermal Conductivity, Section 15 β ASTM Standard D2717
- Viscosity, Section 16 β ASTM Standards D445, D2161, D7042
- Electrical Tests:
- Dielectric Breakdown Voltage, Section 17 β ASTM Standards D877, D1816, D3300
- Dissipation Factor and Relative Permittivity (Dielectric Constant), Section 18 β ASTM Standard D924
- Gassing Characteristic Under Thermal Stress, Section 19 β ASTM Standard D7150
- Gassing Tendency, Section 20 β ASTM Standard D2300
- Resistivity, Section 21 β ASTM Standard D1169
- Chemical Tests:
- Acidity, Approximate, Section 22 β ASTM Standard D1534
- Carbon-Type Composition, Section 23 β ASTM Standard D2140
- Compatibility with Construction Material, Section 24 β ASTM Standard D3455
- Copper Content, Section 25 β ASTM Standard D3635
- Elements by Inductively Coupled Plasma (ICP-AES), Section 26 β ASTM Standard D7151
- Furanic Compounds in Electrical Insulating Liquids, Section 27 β ASTM Standard D5837
- Dissolved Gas Analysis, Section 28 β ASTM Standard D3612
- Gas Content of Cable and Capacitor Liquids, Section 29 β ASTM Standards D831, D1827, D2945
- Neutralization (Acid and Base) Numbers, Section 30 β ASTM Standards D664, D974
- Oxidation Inhibitor Content, Section 31 β ASTM Standards D2668, D4768
- Oxidation Stability, Section 32 β ASTM Standards D1934, D2112, D2440
- Polychlorinated Biphenyl Content (PCB), Section 33 β ASTM Standard D4059
- Sulfur, Corrosive, Section 34 β ASTM Standard D1275
- Water Content, Section 35 β ASTM Standard D1533
- Specification:
- Mineral Insulating Liquid for Electrical Apparatus, Section 36 β ASTM Standard D3487
- Less Flammable Electrical Insulating Liquids, Section 37 β ASTM Standard D5222
- Silicone Fluid used for Electrical Insulation, Section 38 β ASTM Standard D4652
- Natural (Vegetable Oil) Ester Fluids used in Electrical Apparatus, Section 39 β ASTM Standard D6871
1.4Β The values stated in SI units are to be regarded as standard. The values stated in parentheses are provided for information only.
1.5Β This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6Β This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.