ASTM D143-25

Current Revision
Standard Test Methods for Small Clear Specimens of Timber

Best Price Guarantee Apr 15, 2025 English 33 Pages


Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM International Logo

ASTM D143-25

Standard Test Methods for Small Clear Specimens of Timber

PUBLISH DATE 2025
PAGES 33
ASTM D143-25

1.1 These test methods cover the determination of various strength and related properties of wood by testing small clear specimens.

1.1.1 These test methods represent procedures for evaluating the different mechanical and physical properties, controlling factors such as specimen size, moisture content, temperature, and rate of loading.

1.1.2 Sampling and collection of material is discussed in Practice D5536. Sample data, computation sheets, and cards have been incorporated, which were of assistance to the investigator in systematizing records.

1.1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. When a weight is prescribed, the basic inch-pound unit of weight (lbf) and the basic SI unit of mass (kg) are cited.

1.2 The procedures for the various tests appear in the following order:

  • Photographs of Specimens — Sections 5
  • Control of Moisture Content and Temperature — Sections 6
  • Record of Heartwood and Sapwood — Sections 7
  • Static Bending — Sections 8
  • Compression Parallel to Grain — Sections 9
  • Impact Bending — Sections 10
  • Toughness — Sections 11
  • Compression Perpendicular to Grain — Sections 12
  • Hardness — Sections 13
  • Shear Parallel to Grain — Sections 14
  • Cleavage — Sections 15
  • Tension Parallel to Grain — Sections 16
  • Tension Perpendicular to Grain — Sections 17
  • Nail Withdrawal — Sections 18
  • Specific Gravity and Shrinkage in Volume — Sections 19
  • Radial and Tangential Shrinkage — Sections 20
  • Moisture Determination — Sections 21
  • Permissible Variations — Sections 22
  • Calibration — Sections 23

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

4.1 These test methods cover tests on small clear specimens of wood that are made to provide the following:

  • 4.1.1 Data for comparing the mechanical properties of various species,
  • 4.1.2 Data for the establishment of correct strength functions, which in conjunction with results of tests of timbers in structural sizes (see Test Methods D198 and Test Methods D4761), afford a basis for establishing allowable stresses, and
  • 4.1.3 Data to determine the influence on the mechanical properties of such factors as density, locality of growth, position in cross section, height of timber in the tree, change of properties with seasoning or treatment with chemicals, and change from sapwood to heartwood.
Loading...

Failed to load document history.

Publish Date Document Id Type View