ASTM D202-23

Current Revision
Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation

Best Price Guarantee May 1, 2023 English 35 Pages


Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM International Logo

ASTM D202-23

Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation

PUBLISH DATE 2023
PAGES 35
ASTM D202-23

1.1 These test methods cover procedures for sampling and testing untreated paper to be used as an electrical insulator or as a constituent of a composite material used for electrical insulating purposes.

1.1.1 Untreated papers are thin, fibrous sheets normally laid down from a water suspension of pulped fibers (usually cellulosic) with or without various amounts of nonfibrous ingredients, and which are calendared, if required, to obtain desired thickness and density. Nevertheless, these test methods are applicable, generally although not invariably, to papers formed by other means, to papers modified (during or after formation) by additions, and to papers given subsequent mechanical treatments such as creping.

1.1.2 As an electrical insulating and dielectric material, paper is considered “untreated” until it is subjected to a manufacturing process such as drying, impregnation, or varnish treatment.

1.1.3 The test methods given herein were developed specifically for papers having a thickness of 0.75 mm (0.030 in.) or less. A number of these test methods are also suitable for use on other materials such as pulps or boards. Refer to Test Methods D3376 or D3394 to determine which tests are applicable to pulps or electrical insulating boards. In the paper industry, some products in thicknesses of less than 0.75 mm are termed “paperboard”. Such products are included within the scope of these methods.

1.1.4 These test methods are applicable to flexible fibrous-mat materials formed from suspensions of fiber in fluids other than water. Thicknesses of these mats approach 2 mm, and the fibers contained are possibly natural, synthetic, organic, or inorganic; fillers that are natural, synthetic, organic, or inorganic; and flexible polymeric binder materials.

1.2 The procedures appear in the following sections:

Procedure

Sections

ASTM or TAPPI Reference
(Modified)

Absorption (Rise of Water)

78 to 83

. . .

Acidity-Alkalinity-pH

45 to 54

E70

Air Resistance

98 to 101

D726

Aqueous Extract Conductivity

55 to 64

. . .

Ash Content

40 to 44

D586

Bursting Strength

102 to 107

D774/D774M

Chlorides (Water-Extractable)

165 to 183

. . .

Conditioning

15

D6054

Conducting Paths

138 to 151

. . .

Density, Apparent

29

1.1 These test methods cover procedures for sampling and testing untreated paper to be used as an electrical insulator or as a constituent of a composite material used for electrical insulating purposes.

1.1.1 Untreated papers are thin, fibrous sheets normally laid down from a water suspension of pulped fibers (usually cellulosic) with or without various amounts of nonfibrous ingredients, and which are calendared, if required, to obtain desired thickness and density. Nevertheless, these test methods are applicable, generally although not invariably, to papers formed by other means, to papers modified (during or after formation) by additions, and to papers given subsequent mechanical treatments such as creping.

1.1.2 As an electrical insulating and dielectric material, paper is considered “untreated” until it is subjected to a manufacturing process such as drying, impregnation, or varnish treatment.

1.1.3 The test methods given herein were developed specifically for papers having a thickness of 0.75 mm (0.030 in.) or less. A number of these test methods are also suitable for use on other materials such as pulps or boards. Refer to Test Methods D3376 or D3394 to determine which tests are applicable to pulps or electrical insulating boards. In the paper industry, some products in thicknesses of less than 0.75 mm are termed “paperboard”. Such products are included within the scope of these methods.

1.1.4 These test methods are applicable to flexible fibrous-mat materials formed from suspensions of fiber in fluids other than water. Thicknesses of these mats approach 2 mm, and the fibers contained are possibly natural, synthetic, organic, or inorganic; fillers that are natural, synthetic, organic, or inorganic; and flexible polymeric binder materials.

1.2 The procedures appear in the following sections:

Procedure

Sections

ASTM or TAPPI Reference
(Modified)

Absorption (Rise of Water)

78 to 83

. . .

Acidity-Alkalinity-pH

45 to 54

E70

Air Resistance

98 to 101

D726

Aqueous Extract Conductivity

55 to 64

. . .

Ash Content

40 to 44

D586

Bursting Strength

102 to 107

D774/D774M

Chlorides (Water-Extractable)

165 to 183

. . .

Conditioning

15

D6054

Conducting Paths

138 to 151

. . .

Density, Apparent

29</

8.1 In the buyer-seller relationship it is necessary that an understanding exists as to the expected nominal characteristics of the product, and the magnitude of permissible departure from the nominal values.

Also, it is necessary that an agreement be reached as to how many units of a lot can fall outside of the specification limits without rejection of the lot.

It is this latter subject that is addressed by this test method.

Loading...

Failed to load document history.

Publish Date Document Id Type View