ASTM D2225-20

Current Revision
Standard Test Methods for Silicone Fluids Used for Electrical Insulation

Best Price Guarantee Nov 1, 2020 English 4 Pages


Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM D2225-20 PDF Preview
ASTM D2225-20

1.1 These test methods cover the testing of silicone liquids for use in transformers, capacitors, and electronic assemblies as an insulating or cooling medium, or both. These methods are generally suitable for specification acceptance (Specification D4652), factory control, referee testing, and research.

1.2 Although some of the test methods listed here apply primarily to petroleum-based fluids, they are, with minor revisions, equally applicable to silicone liquids.

1.3 Silicone liquids are used for electrical insulating purposes because of their stable properties at high and low temperatures and their relative environmental inertness.

1.4 A list of the properties and standards are as follows:

  • Physical:
    • Color — Section 6 — ASTM Test Method D2129
    • Flash point — Section 7 — ASTM Test Method D92
    • Fire point — Section 7 — ASTM Test Method D92
    • Polychlorinated biphenyl content — Section 8 — ASTM Test Method D4059
    • Pour point — Section 9 — ASTM Test Method D97
    • Refractive index — Section 10 — ASTM Test Method D1807
    • Specific gravity — Section 11 — ASTM Test Methods D1298, D1481, D4052
    • Volatility — Section 12 — ASTM Test Method D4559
    • Viscosity — Section 13 — ASTM Test Method D445
  • Chemical:
    • Acid number — Section 14 — ASTM Test Method D974
    • Water content — Section 15 — ASTM Test Method D1533
  • Electrical:
    • Relative permittivity — Section 16 — ASTM Test Method D924
    • Dielectric breakdown voltage — Section 17 — ASTM Test Methods D877, D1816
    • Dissipation factor — Section 18 — ASTM Test Method D924
    • Specific resistance — Section 19 — ASTM Test Method D1169
    • Compatibility — Section 20 — ASTM Test Method D5282

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

1.1 These test methods cover the testing of silicone liquids for use in transformers, capacitors, and electronic assemblies as an insulating or cooling medium, or both. These methods are generally suitable for specification acceptance (Specification D4652), factory control, referee testing, and research.

1.2 Although some of the test methods listed here apply primarily to petroleum-based fluids, they are, with minor revisions, equally applicable to silicone liquids.

1.3 Silicone liquids are used for electrical insulating purposes because of their stable properties at high and low temperatures and their relative environmental inertness.

1.4 A list of the properties and standards are as follows:

Property Measured

Section

ASTM Test Method

Physical:

 

 

 Color

 6

D2129

 Flash point

 7

D92

 Fire point

 7

D92

 Polychlorinated biphenyl
  content

 8

D4059

 Pour point

 9

D97

 Refractive index

10

D1807

 Specific gravity

11

D1298, D1481, D4052

 Volatility

12

D4559

 Viscosity

13

D445

Chemical:

 

 

 Acid number

14

D974

 Water content

15

D1533

Electrical:

 

 

 Relative permittivity

16

4.1 Tests covered in this standard may be used for quality control and design considerations.

4.2 Included in each test method is a brief statement describing its significance.

Loading...

Failed to load document history.

Publish Date Document Id Type View