ASTM D2484-06(2012)e1

Withdrawn Revision
Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape (Withdrawn 2020)

Best Price Guarantee Apr 1, 2012 English 3 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM D2484-06(2012)e1 PDF Preview
ASTM D2484-06(2012)e1

This specification covers the manufacture, testing, and standard requirements of four types of electrical insulating tape consisting of a polyester plastic film coated on one side with a pressure-sensitive adhesive.

Besides differences in nominal thickness, Type 1 is a general-purpose tape coated with a thermoplastic adhesive that is not chemically heat reactive, while Types 2, 3, and 4 are general-purpose tapes coated with a heat-reactive thermosetting adhesive.

The tapes shall be tested accordingly and consequently conform to standard widths, lengths, and thicknesses, and other specific properties such as:

  • elongation
  • penetration
  • high-humidity insulation resistance (measure of corrosion)
  • strain relief (shrinkage)
  • breaking strength
  • dielectric breakdown
  • adhesion to steel and backing

1.1 This specification covers electrical insulating tape consisting of a polyester plastic film coated on one side with a pressure-sensitive adhesive.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parenthesis are provided for information only.

Note 1β€”This standard and IEC 60454–3–2 and –3 are similar but not equivalent in all details.

Loading...

Failed to load document history.

Publish Date Document Id Type View