ASTM D2633-21

Current Revision
Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable

Best Price Guarantee Jan 1, 2021 English 13 Pages


Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM D2633-21 PDF Preview
ASTM D2633-21

1.1 These test methods cover procedures for the testing of thermoplastic insulations and jackets used on insulated wire and cable. To determine the test to be made on the particular insulation or jacket compound, refer to the product specification for that type. These test methods do not apply to the class of products known as flexible cords. The electrical tests on insulation and water-absorption tests do not apply to the class of products having a separator between the conductor and the insulation.

1.2 These test methods pertain to insulation or jacket material for electrical wires and cables. In many instances the insulation or jacket material cannot be tested unless it has been formed around a conductor or cable. Therefore, tests are done on insulated or jacketed wire or cable in these test methods solely to determine the relevant property of the insulation or jacket material and not to test the conductor or completed cable.

1.3 Whenever two sets of values are stated, in different units, the values in the first set are regarded as standard, while the values in parentheses are provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazards see Section 4 and for fire test safety caveats see Test Method D8354.

1.5 These test methods appear in the following sections:

  • Cold Bend Test: Sections 75 to 77
  • Dielectric Strength Retention Test: Sections 45 to 51
  • Electrical Tests of Insulation: Sections 17 to 29
  • Heat Distortion Test: Section 74
  • Heat Shock Test: Section 73
  • Insulation Resistance Test: Sections 30 to 37
  • Partial-discharge Extinction Level Test: Sections 38 to 44
  • Physical Tests of Insulation and Jackets: Sections 5 to 16
  • Flammability: Section 63 (Test Method D8354)
  • Surface Resistivity Test: Sections 64 to 67
  • Thermal Tests: Sections 72 to 77
  • Track Resistance Test: Sections 78 to 81
  • U-bend Discharge Test: Sections 68 to 71
  • Vertical Flame Test: Section 63
  • Water Absorption Tests, Accelerated: Sections 52 to 62

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

1.1 These test methods cover procedures for the testing of thermoplastic insulations and jackets used on insulated wire and cable. To determine the test to be made on the particular insulation or jacket compound, refer to the product specification for that type. These test methods do not apply to the class of products known as flexible cords. The electrical tests on insulation and water-absorption tests do not apply to the class of products having a separator between the conductor and the insulation.

1.2 These test methods pertain to insulation or jacket material for electrical wires and cables. In many instances the insulation or jacket material cannot be tested unless it has been formed around a conductor or cable. Therefore, tests are done on insulated or jacketed wire or cable in these test methods solely to determine the relevant property of the insulation or jacket material and not to test the conductor or completed cable.

1.3 Whenever two sets of values are stated, in different units, the values in the first set are regarded as standard, while the values in parentheses are provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazards see Section 4 and for fire test safety caveats see Test Method D8354.

1.5 These test methods appear in the following sections:

  • Cold Bend Test: 75 to 77
  • Dielectric Strength Retention Test: 45 to 51
  • Electrical Tests of Insulation: 17 to 29
  • Heat Distortion Test: 74
  • Heat Shock Test: 73
  • Insulation Resistance Test: 30 to 37
  • Partial-discharge Extinction Level Test: 38 to 44
  • Physical Tests of Insulation and Jackets: 5 to 16
  • Flammability: 63 (Test Method D8354)
  • Surface Resistivity Test: 64 to 67
  • Thermal Tests: 72 to 77
  • Track Resistance Test: 78 to 81
  • U-bend Discharge Test: 68 to 71
  • Vertical Flame Test: 63
  • Water Absorption Tests, Accelerated: 52 to 62

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

6.1 Physical tests, properly interpreted, provide information with regard to the physical properties of the insulation or jacket.

The physical test values give an approximation of how the insulation will physically perform in its service life.

Physical tests provide useful data for research and development, engineering design, quality control, and acceptance or rejection under specifications.

Loading...

Failed to load document history.

Publish Date Document Id Type View