ASTM D3263-03

Current Revision
Standard Test Methods for Corrosivity of Solvent Systems for Removing Water-Formed Deposits

Best Price Guarantee Aug 10, 2003 English 8 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM D3263-03 PDF Preview
ASTM D3263-03

1.1 These test methods cover the determination of corrosivity of solvent systems used to remove water-formed deposits from the metal and alloy surfaces of water handling equipment.

Four test methods are given as follows:

  • Test Method A—Corrosivity in the Absence of Deposits (Sections 10 to 15)
  • Test Method B—Corrosivity in the Presence of Selected Ions (Sections 16 to 21)
  • Test Method C—Corrosivity with Magnetite-Coated Steel Specimens (Sections 22 to 28)
  • Test Method D—Corrosivity with Deposit-Coated Specimens (Sections 29 to 35)

1.2 Test Methods A and B provide for corrosivity testing under either static immersion or dynamic conditions.

1.3 Test Methods C and D are procedures applicable for corrosivity testing under static immersion conditions only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.1 These test methods cover the determination of corrosivity of solvent systems used to remove water-formed deposits from the metal and alloy surfaces of water handling equipment.

Four test methods are given as follows:

  • Test Method A—Corrosivity in the Absence of Deposits: Sections 10 to 15
  • Test Method B—Corrosivity in the Presence of Selected Ions: Sections 16 to 21
  • Test Method C—Corrosivity with Magnetite-Coated Steel Specimens: Sections 22 to 28
  • Test Method D—Corrosivity with Deposit-Coated Specimens: Sections 29 to 35

1.2 Test Methods A and B provide for corrosivity testing under either static immersion or dynamic conditions.

1.3 Test Methods C and D are procedures applicable for corrosivity testing under static immersion conditions only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Test Method A is necessary because the corrosivity of a solvent system can be detrimental to the equipment being cleaned. It is used to compare the corrosivity of various solvent systems and to determine the corrosivity of selected solvent systems under different conditions.

Test Method B is necessary because the corrosivity of a solvent system can be changed by the presence of ions in the solvent system. It is used to determine if the ions that might be present during a cleaning operation would significantly change the corrosivity of a solvent system.

Test Method C is necessary because the corrosivity of a solvent system under magnetite removal conditions can be different from the corrosivity in the absence of deposit. It is used to determine the corrosivity of the solvent system under magnetite removal conditions.

Test Method D is necessary because the presence or absence of deposits may affect the corrosivity of the solvent system. It is used to determine the corrosivity of solvent systems on deposit-coated specimens. These results are compared with results obtained from Test Method A to determine the effect of the deposit.

Loading...

Failed to load document history.

Publish Date Document Id Type View