ASTM D3376-25

Current Revision
Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation

Best Price Guarantee Dec 1, 2025 English 10 Pages


Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM International Logo

ASTM D3376-25

Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation

PUBLISH DATE 2025
PAGES 10
ASTM D3376-25

1.1 These test methods cover the sampling and testing of cellulosic pulps for use in the manufacture of electrical insulating papers and boards or in the direct application of pulp fibers as insulation to electrical conductors.

Note 1: Consider the significance of any one pulp property test method, as set forth herein, with discretion depending on the product made from the pulp.

1.2 Sections on Reagents, Sampling, and Report are integral parts of each of the individual test methods that follow.

1.3 Each test method is described as being a measure of either a bulk property of the pulp or a property of a handsheet formed from the pulp.

1.3.1 Bulk characteristics determinable by these procedures appear in the following sections:

  • Aqueous Extract Conductivity: Sections 8 & 9, ASTM Method Reference D202
  • Aqueous Extract pH: Sections 10 & 11, ASTM Method Reference D202
  • Aqueous Extractable Acidity-Alkalinity: Sections 12 & 13, ASTM Method Reference D202
  • Analysis of Ash for Cations by Atomic Absorption Spectrophotometry: Sections 70 – 78, ASTM Method References D1193 & D2576
  • Ash Content: Sections 79 – 82, ASTM Method Reference D202, TAPPI Method T 413
  • Dirt in Pulp: Sections 40 & 41, TAPPI Method T 213
  • Fiber Analysis: Sections 23 & 24, ASTM Method References D202 & D1030
  • Fiber Length of Pulp: Sections 42 & 43, TAPPI Methods T 232, T 233
  • Freeness (Canadian Standard Freeness): Sections 53 & 54, TAPPI Method T 227
  • Kappa Number/Permanganate Number (Substances Oxidizable by Permanganate): Sections 27 & 28, TAPPI Methods T 236, UM 251
  • Laboratory Processing of Pulp (Beater Method): Sections 51 & 52, TAPPI Method T 200
  • Moisture in Pulp: Sections 31 – 33, TAPPI Method T 210
  • Neutral Aqueous Extractable Hardness in Pulp: Sections 16 – 22, ASTM Method References D202, D1126, & D2576
  • Pentosan Content of Pulp: Sections 29 & 30, TAPPI Method T 223
  • Resistance of Pulp to Disintegration (Standard RPG): Sections 44 – 50, TAPPI Methods T 239, UM 252
  • Shive Count: Sections 34 – 39
  • Solvent-Soluble Matter in Pulp: Sections 25 & 26, ASTM Method Reference D202
  • Tensile Properties: Sections 65 – 69, ASTM Method Reference D202
  • Water-Extractable Chlorides: Sections 14 & 15, ASTM Method Reference D202

1.3.2 Handsheet characteristics determinable by these procedures appear in the following sections:

  • Air Resistance (Porosity): Sections 57 & 58, ASTM Method Reference D202, TAPPI Method T 205
  • Apparent Density: Sections 63 & 64, ASTM Method Reference D202, TAPPI Method T 205
  • Bursting Strength: Sections 59 & 60, ASTM Method References D202 & D774/D774M, TAPPI Method T 205
  • Folding Endurance (M.I.T.): Sections 51 & 52, ASTM Method References D202 & D2176, TAPPI Method T 205
  • Forming Handsheets for Physical Tests of Pulp: Sections 55 & 56, TAPPI Method T 205
  • Tensile Strength: Sections 65 & 66, ASTM Method References D202 & D828, TAPPI Method T 205

Note 2: Methods for Ash, Silica, selected cations from Ash, Heat Stability, α, β, and γ Cellulose, Viscosity, Total Chlorine, Tear, and Dissipation Factor and Relative Permittivity, will be considered for addition as methods are developed.

1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

8.1 The conductivity of the water extract of electrical grade pulp results from electrolytic impurities in the pulp potentially present as ionizable acids, bases, salts, or a combination of these.

The presence of electrolytic impurities in electrical insulation is undesirable as they tend to lower insulation resistance and have corrosion-producing tendencies under conditions of applied potential.

When comparing test data, note that the extract conductivity of pulps, especially those of high purity, changes with time after manufacturing in some instances.

This test is useful for routine acceptance testing, the comparison of different pulps, and research work.6

Loading...

Failed to load document history.

Publish Date Document Id Type View