ASTM D3394-16(2022)

Current Revision
Standard Test Methods for Sampling and Testing Electrical Insulating Board

Best Price Guarantee May 1, 2022 English 10 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
ASTM D3394-16(2022) PDF Preview
ASTM D3394-16(2022)

1.1Β These test methods cover the sampling and testing of electrical insulating boards. These boards are porous, usually fibrous sheets used for dielectric and structural purposes in electrical apparatus.

1.2Β These test methods are not intended for testing vulcanized fibre or molded laminated sheets.

1.3Β These test methods are applicable to board materials having a nominal thickness of at least 0.030 in. (0.76 mm).

Note 1:Β For materials thinner than 0.030 in. (0.76 mm) see Test Methods D202.

1.4Β The test methods appear in the following sections:

 
Sections

ASTM Method
Reference

Apparent Density

18 – 23

Aqueous Extract Characteristics

36 – 42

D202

Ash Content

43 – 46

T 413

Compatibility with Dielectric
 Liquids

47 – 52

D664, D877, D924,
D971, D974, D1169,
D1500, D1816,
D3455, D3487

Compressibility

79 – 85

Conditioning

11

D685

Degree of Polymerization

86 – 89

D4243

Dielectric Strength in Air

53 – 59

D149

Dielectric Strength in Oil

60 – 65

D149, D2413, D3426

Dimensions of Sheets

12 – 17

Moisture Content

31 – 35

D644

Oil Absorption

72 – 78

Reports

10

Sampling

6 – 9

D3636

Shrinkage

24 – 30

D644

Tensile Properties

66 – 71

D202

1.5Β The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.6Β This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7Β This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

1.1 These test methods cover the sampling and testing of electrical insulating boards. These boards are porous, usually fibrous sheets used for dielectric and structural purposes in electrical apparatus.

1.2 These test methods are not intended for testing vulcanized fibre or molded laminated sheets.

1.3 These test methods are applicable to board materials having a nominal thickness of at least 0.030 in. (0.76 mm).

Note 1: For materials thinner than 0.030 in. (0.76 mm) see Test Methods D202.

1.4 The test methods appear in the following sections:

  • Apparent Density: Sections 18–23
  • Aqueous Extract Characteristics: Sections 36–42; ASTM Method Reference: D202
  • Ash Content: Sections 43–46; ASTM Method Reference: T 413
  • Compatibility with Dielectric Liquids: Sections 47–52; ASTM Method References: D664, D877, D924, D971, D974, D1169, D1500, D1816, D3455, D3487
  • Compressibility: Sections 79–85
  • Conditioning: Section 11; ASTM Method Reference: D685
  • Degree of Polymerization: Sections 86–89; ASTM Method Reference: D4243
  • Dielectric Strength in Air: Sections 53–59; ASTM Method Reference: D149
  • Dielectric Strength in Oil: Sections 60–65; ASTM Method References: D149, D2413, D3426
  • Dimensions of Sheets: Sections 12–17
  • Moisture Content: Sections 31–35; ASTM Method Reference: D644
  • Oil Absorption: Sections 72–78
  • Reports: Section 10
  • Sampling: Sections 6–9; ASTM Method Reference: D3636
  • Shrinkage: Sections 24–30; ASTM Method Reference: D644
  • Tensile Properties: Sections 66–71; ASTM Method Reference: D202

1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

19.1Β Apparent density affects the dielectric and physical characteristics of insulating board and is a factor in the economics of its use in apparatus.

This test is useful for specification, design, and quality control purposes.

Loading...

Failed to load document history.

Publish Date Document Id Type View