Logo
Login Sign Up
Current Revision

ASTM E2375-26a

Standard Practice for Ultrasonic Testing of Wrought Products
Best Price Guarantee
Instant
2-5 Days
SAVE 10%

$104.00

$104.00

$187.20

$125.00

$125.00

$225.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


View in Library
or
ASTM International Logo

ASTM E2375-26a

Standard Practice for Ultrasonic Testing of Wrought Products

PUBLISH DATE 2026
PAGES 22
ASTM E2375-26a

1.1 Purpose—This practice covers the minimum requirements for ultrasonic examination of wrought products.

Note 1: This practice was adopted to replace MIL-STD-2154, 30 Sept. 1982. This practice is intended to be used for the same applications as the document which it replaced. Users should carefully review its requirements when considering its use for new or different applications, or both.

1.2 Application—This practice is applicable for examination of materials such as wrought metals and wrought metal products having a thickness or cross section equal to 0.250 in. (6.35 mm) or greater.

1.2.1 Wrought Aluminum Alloy Products—Examination shall be in accordance with Practice B594 and certification should be in accordance with both Practices E2375 and B594. Angle beam scans of wrought aluminum alloy products shall be performed in accordance with this practice when required by the purchase order or contract.

1.3 Acceptance Class—When examination is performed in accordance with this practice, engineering drawings, specifications, or other applicable documents shall indicate the acceptance criteria. Five ultrasonic acceptance classes are defined in Table 1. One or more of these classes may be used to establish the acceptance criteria or additional or alternate criteria may be specified.

1.4 Order of Precedence—Contractual requirements and authorized direction from the cognizant engineering organization may add to or modify the requirements of this practice. Otherwise, in the event of conflict between the text of this practice and the references cited herein, the text of this practice takes precedence. Nothing in this practice, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

1.5 Measurement Values—The values stated in inch-pound are to be regarded as standard. The metric equivalents are in parentheses.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

4.1 This practice is intended primarily for the examination of wrought metals, forged, rolled, machined parts or components to an ultrasonic class most typically specified in the purchase order or other contract document.

SDO ASTM: ASTM International
Document Number E2375
Publication Date March 15, 2026
Language en - English
Page Count 22
Revision Level 26a
Supercedes
Committee E07.06
Loading...

Failed to load document history.

Publish Date Document Id Type View