ASTM F1665-08(2026)

This specification covers poly(vinyl chloride) (PVC) and other conforming organic polymer-coated steel barbed wire consisting of two polymer-coated strands, with four-point barbs of zinc-coated steel or aluminum alloy wire used with chain-link fence.

PVC and other organic polymer coatings hereinafter will be designated as polymer coating.

Barbed wire strand wire, produced from three classes of wire coatings, is covered as follows:

• Class 1 - polymer coating extruded over zinc-coated or aluminum-coated or zinc-5% aluminum-mischmetal alloy-coated steel wire;
• Class 2a - polymer coating extruded and adhered to zinc-coated or aluminum-coated or zinc-5% aluminum-mischmetal alloy-coated steel wire;
• Class 2b - polymer coating fused and adhered to zinc-coated or aluminum-coated or zinc-5% aluminum-mischmetal alloy-coated steel wire.

Polymer-coated steel barbed wire is supplied in a choice of two types as follows:

• Type I - standard,
• Type II - high security.

Breaking strength of the stranded barbed wire shall be tested to meet the requirements prescribed.

Adhesion test, accelerated aging test, and color test shall be made to meet the requirements prescribed.

1.1 This specification covers PVC and other conforming organic polymer-coated steel barbed wire consisting of two polymer-coated strands, with four-point barbs of zinc-coated steel or aluminum alloy wire. PVC and other organic polymer coatings hereinafter will be designated as polymer coating.

1.2 Barbed wire strand wire, produced from three classes of wire coatings, is covered as follows:

• 1.2.1 Class 1, consisting of a polymer coating extruded over zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire;
• 1.2.2 Class 2a, consisting of a polymer coating extruded and adhered to zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire; and
• 1.2.3 Class 2b, consisting of a polymer coating fused and adhered to zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire.

1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.