A collection of featured documents from our library that are popular among our users or otherwise noteworthy.
Specification for heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3)
Specification for nickel-iron-chromium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 42.5, Cr 12.5, Mo 5.8, Ti 3.0, Fe remainder)
Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)
Specification for nickel-chromium- iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)
Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire for the manufacture of fasteners (maximum diameter or minor sectional dimension 25 mm) (nickel base, Cr 19.5, Ti 2.2, Al 1.4)
Specification for pressure-sensitive adhesive identification tape
Specification for tube of 99% aluminium (cold drawn: seamless, not tested hydraulically) (not exceeding 12 mm wall thickness)
Specification for ingots and castings of magnesium-cerium-zinc-zirconium alloy (precipitation treated) (rare earth metals 3.0, Zn 2.3, Zr 0.6)
Specification for ingots and castings of magnesium-zinc-zirconium alloy (precipitation treated) (Zn 4.5, Zr 0.7)
Specification for ingots and castings of magnesium-zinc-cerium-zirconium alloy (precipitation treated) (Zn 4.5, rare earth metals 1.2, Zr 0.7)
Ingots (as cast) and castings (solution treated and artificially aged) of aluminium-silicon-magnesium alloy (Si 7, Mg 0.6)
Aluminium coated aluminium alloy sheets and coils
Procedure for inspection and testing of wrought magnesium-base alloys
Specification for tube of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0)
Specification for sheet and strip of magnesium-3% zinc-zirconium alloy (Zn 3.0, Zr 0.6)
Specification for bars and extruded sections of magnesium-3% zinc-zirconium alloy (not exceeding 100 mm diameter or minor sectional dimension) (Zn 3.0, Zr 0.6)
Specification for bars and extruded sections of magnesium-1¼% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (not exceeding 50 mm diameter or minor sectional dimension) (Zn 1.25, Zr 0.6)
Specification for tube of magnesium-1¼% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (Zn 1.25, Zr 0.6)
Aluminium-copper-magnesium-silicon-manganese alloy tubes (solution treated and aged at room temperature)
Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
Specification for sheet and strip of aluminium-2¼% magnesium alloy (three-quarter hard-H6)
Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9)
Specification for bars and extruded sections of aluminium-copper-silicon-magnesium alloy (solution treated and aged at room temperature) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 1.5, Si 1, Mg 0.8)
Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8)
Aluminum-copper-magnesium alloy wires for solid, cold forged rivets (not exceeding 3/8 inch diameter)