Logo
Login Sign Up
Current Consolidated

BSI BS EN 60529:1992+A2:2013

Degrees of protection provided by enclosures (IP Code)
Best Price Guarantee
Instant

$431.32

2-5 Days

$431.32

SAVE 10%

$776.38


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


View in Library
or
British Standards Institution Logo

BSI BS EN 60529:1992+A2:2013

Degrees of protection provided by enclosures (IP Code)

PUBLISH DATE 2019
PAGES 58
BSI BS EN 60529:1992+A2:2013

This standard applies to the classification of degrees of protection provided by enclosures for electrical equipment with a rated voltage not exceeding 72,5 kV.

The object of this standard is to give:

  1. Definitions for degrees of protection provided by enclosures of electrical equipment as regards:

    1. protection of persons against access to hazardous parts inside the enclosure;

    2. protection of the equipment inside the enclosure against ingress of solid foreign objects;

    3. protection of the equipment inside the enclosure against harmful effects due to the ingress of water.

  2. Designations for these degrees of protection.

  3. Requirements for each designation.

  4. Tests to be performed to verify that the enclosure meets the requirements of this standard.

It will remain the responsibility of individual technical committees to decide on the extent and manner in which, the classification is used in their standards and to define 'enclosure' as it applies to their equipment. However, it is recommended that for a given classification the tests do not differ from those specified in this standard. If necessary, complementary requirements may be included in the relevant product standard. A guide for the details to be specified in relevant product standards is given in annex B.

For a particular type of equipment, a technical committee may specify different requirements provided that at least the same level of safety is ensured.

This standard deals only with enclosures that are in all other respects suitable for their intended use as specified in the relevant product standard and which from the point of view of materials and workmanship ensure that the claimed degrees of protection are maintained under the normal conditions of use.

This standard is also applicable to empty enclosures provided that the general test requirements are met and that the selected degree of protection is suitable for the type of equipment A1_startto be protectedA1_end.

Measures to protect both the enclosure and the equipment inside the enclosure against external influences or conditions such as

  • mechanical impacts

  • corrosion

  • corrosive solvents (for example, cutting liquids)

  • fungus

  • vermin

  • solar radiation

  • icing

  • moisture (for example, produced by condensation)

  • explosive atmospheres

and the protection against contact with hazardous moving parts external to the enclosure (such as fans), are matters for the relevant product standard to be protected.

Barriers external to the enclosure and not attached to it and obstacles which have been provided solely for the safety of personnel are not considered as a part of the enclosure and are not dealt with in this standard.

SDO BSI: British Standards Institution
Document Number EN 60529
Publication Date March 1, 2019
Language en - English
Page Count
Revision Level
Supercedes
Committee GEL/70
Loading...

Failed to load document history.

Publish Date Document Id Type View