Iron ores. Determination of hygroscopic moisture in analytical samples. Gravimetric, Karl Fischer and mass-loss methods
This International Standard specifies the following four test methods for the determination of the hygroscopic moisture content of test samples:
Method 1 - Gravimetric method;
Method 2 - Karl Fischer volumetric method;
Method 3 - Karl Fischer coulometric method;
Method 4 - Mass-loss method.
Any of these methods is applicable wherever the analytical value of a chemical constituent is to be calculated to a dried sample basis in the following ore types.
Processed ores containing metallic iron (direct reduced iron).
Natural or processed ores in which the sulfur content is greater than 0,2 % (mass fraction).
Natural or processed ores in which the combined water is greater than 2,5 % (mass fraction).
Any of these methods is applicable to a concentration range of 0,05 % (mass fraction) to 4,5 % (mass fraction) hygroscopic moisture.
NOTE 1 Where the reportable moisture content of a commercial consignment of ore is required, the procedure in ISO 3087 is used.
NOTE 2 With natural or processed ores outside the field of application specified in a), b) or c), a determination of a constituent at any level of concentration may be conducted using any of these methods, or as specified in ISO 7764.
NOTE 3 Alternatively, the loss or ignition content may be measured as an estimate of the combined water content.
| SDO | BSI: British Standards Institution |
| Document Number | ISO 2596 |
| Publication Date | June 30, 2006 |
| Language | en - English |
| Page Count | 42 |
| Revision Level | |
| Supercedes | |
| Committee | W/- |