+1 888 608-7511
Need help finding a standard?
Help Desk
Amendment 1:2022 to CSA ISO/IEC 14443-3:19, Cards and security devices for personal identification — Contactless proximity objects — Part 3: Initialization and anticollision - Amendment 1: Dynamic power level management (Adopted amendment 1:2021 to ISO/IEC 14443-3:2018)
This document describes the following: — polling for proximity cards or objects (PICCs) entering the field of a proximity coupling device (PCD); — the byte format, the frames and timing used during the initial phase of communication between PCDs and PICCs; — the initial Request and Answer to Request command content; — methods to detect and communicate with one PICC among several PICCs (anticollision); — other parameters required to initialize communications between a PICC and PCD; — optional means to ease and speed up the selection of one PICC among several PICCs based on application criteria; — optional capability to allow a device to alternate between the functions of a PICC and a PCD to communicate with a PCD or a PICC, respectively. A device which implements this capability is called a PXD. Protocol and commands used by higher layers and by applications and which are used after the initial phase are described in ISO/IEC 14443-4. This document is applicable to PICCs of Type A and of Type B (as described in ISO/IEC 14443-2), to PCDs (as described in ISO/IEC 14443-2) and to PXDs. NOTE 1 Part of the timing of data communication is defined in ISO/IEC 14443-2. NOTE 2 Test methods for this document are defined in ISO/IEC 10373-6.
Failed to load document history.
| Publish Date | Document Id | Type | View |
|---|