IEC 60404-8-10 Ed. 2.0 b:2009

Current Revision
Magnetic materials - Part 8-10: Specifications for individual materials - Magnetic materials (iron and steel) for use in relays

Best Price Guarantee May 1, 2009 EN/FR 46 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00
View in Library
or
International Electrotechnical Commission Logo

Magnetic materials - Part 8-10: Specifications for individual materials - Magnetic materials (iron and steel) for use in relays

PUBLISH DATE 2009
PAGES 46

Magnetic materials - Part 8-10: Specifications for individual materials - Magnetic materials (iron and steel) for use in relays

IEC 60404-8-10:2009 specifies the general requirements, magnetic properties, geometric characteristics and tolerances as well as inspection procedures for magnetic materials used primarily for relays.

This standard applies to pure iron, non-alloyed and alloyed steel, and ferritic stainless steel products usually delivered in either the semi-processed or fully-processed state. These materials correspond to classes A, B, C and D.3 of IEC 60404-1.

This second edition cancels and replaces the first edition published in 1994 and constitutes a technical revision. The main modifications from the previous edition of the standard are as follows:

  • Introduction of the ferritic stainless steels and the fully-processed state in the scope of the standard (see Clause 1);
  • Modification of the designation with the letter R at the beginning and the condition and state at the end (see Clause 5);
  • Introduction of the new grades R160 and R320 (see Table 2);
  • Modification of the requirements for the heat treatment of test specimens for semi-processed material (see Subclause 8.3.1);
  • Indication in Bibliography of standards referred to in this standard as an information.
Loading...

Failed to load document history.

Publish Date Document Id Type View