IEC 60603-3 Ed. 1.0 b:1987

Current Revision
Connectors for frequencies below 3 MHz for use with printed boards. Part 3: Two-part connectors for printed boards having contacts spaced at 2.54 mm (0.100 in) centres and staggered terminations at that same spacing

Best Price Guarantee Jan 1, 1987 EN/FR 1 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00
View in Library
or
International Electrotechnical Commission Logo

Connectors for frequencies below 3 MHz for use with printed boards. Part 3: Two-part connectors for printed boards having contacts spaced at 2.54 mm (0.100 in) centres and staggered terminations at that same spacing

PUBLISH DATE 1987

Connectors for frequencies below 3 MHz for use with printed boards.

Part 3: Two-part connectors for printed boards having contacts spaced at 2.54 mm (0.100 in) centres and staggered terminations at that same spacing.

Applies to a group of related rectangular, multicontact, two-part printed board connectors with male and female contacts in conjunction with either solder or solderless terminations (such as wrap type).

All connectors have the same contact spacing using the basic grid of 2.54 mm (0.100 in).

The attachment of the connector to the printed board is accomplished with a series of cantilever solder tabs, which are distributed evenly on both sides of the board.

Loading...

Failed to load document history.

Publish Date Document Id Type View