IEC 61003-1 Ed. 3.0 b:2016

Current Revision
Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods for evaluating performance

Best Price Guarantee Jun 1, 2016 EN/FR 54 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00
View in Library
or
International Electrotechnical Commission Logo

Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods for evaluating performance

PUBLISH DATE 2016
PAGES 54

Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods for evaluating performance

IEC 61003-1:2016 is applicable to pneumatic and electric industrial-process instruments or control devices using measured values that are continuous signals, either a mechanical (position, force, etc.) or a standard electric signal.

It is intended to specify uniform terminologies and testing methods for performance evaluation of industrial-process instruments or process control systems modules with analogue measured values and two- or multi-position outputs.

This third edition cancels and replaces the second edition published in 2004. This edition constitutes a technical revision.

This edition includes the following significant technical changes with respect to the previous edition:

  • Use of the term "two-position output" instead of "two-state instrument" (see 3.2);
  • Use of the term "differential gap" instead of "switching differential" (see 3.4);
  • Use of "fast transient/burst immunity requirements" instead of "power supply transient overvoltages", and revision of the test method (see 6.2.10);
  • Deletion of 6.2.12 "common mode interference" and 6.2.13 "normal mode interference (series mode)" tests of the previous edition;
  • Use of the term "electromagnetic field" instead of "radiated electromagnetic interference", the test method remained the same (see 6.2.16);
  • Use of the term "dielectric strength" instead of "isolation test", and revision of the reference (see 6.3.4);
  • Deletion of Subclauses "8.2 Design features", "10.1 Routine maintenance and adjustment", and "10.2 Repair" of the previous edition.
Loading...

Failed to load document history.

Publish Date Document Id Type View