Current Revision

IEEE C37.74-2014

IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV

Online PDF

$118.00

Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00

I have read and agree to the Terms & Conditions

IEEE C37.74-2014

IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV

PUBLISH DATE 2015

PAGES 58

IEEE C37.74-2014

Document Information

Revision Standard - Inactive-Reserved. Required definitions, ratings, procedures for performing design tests and production tests, and construction requirements for subsurface, vault, and padmounted load-interrupter switchgear and fused load-interrupter switchgear for ac systems up to 38 kV are covered in this standard.

This standard applies to enclosed assemblies of single-phase and three-phase, dead-front and live-front, subsurface, vault, and padmounted, load-interrupter switches with or without protective devices such as fuses or fault interrupters, up to 38 kV rated maximum voltage.


SDO	IEEE: Institute of Electrical and Electronics Engineers
Document Number	C37.74
Publication Date	March 31, 2015
Language	en - English
Page Count	58
Revision Level
Supercedes
Committee	Switchgear

Publish Date	Document Id	Type	View
March 31, 2015	C37.74-2014	Revision
Sept. 26, 2003	C37.74-2003	Revision

SDO	Document	Title
IEEE	IEEE C37.60	IEEE Standard Requirements for Overhead, Pad Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for alternating current systems up to 38 kV
IEEE	IEEE C37.62	IEEE Standard for Pad-Mounted, Dry Vault, Submersible, and Overhead Fault Interrupters for Alternating Current Systems Up to and Including 38 kV
IEEE	IEEE C37.71	IEEE Standard for Three-Phase, Manually Operated Subsurface Load Interrupting Switches for Alternating-Current Systems
IEEE	IEEE C37.63	IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems up to and Including 38 kV
IEEE	IEEE C37.66	IEEE Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV)
IEEE	IEC 62271-111	IEC 62271-111 Ed.1 (IEEE Std C37.60-2003-Compilation): High Voltage Switchgear and Control gear -- Part 111: Overhead, Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for alternating current systems up to 38 kV
IEEE	IEEE/IEC C37.60	IEEE/IEC International Standard - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV
IEEE	IEEE C37.30.3	IEEE Standard Requirements for High-Voltage Interrupter Switches, Interrupters, or Interrupting Aids Used on or Attached to Switches Rated for Alternating Currents Above 1000 V
IEEE	IEEE 1247	IEEE Standard for Interrupter Switches for Alternating Current, Rated Above 1000 Volts
IEEE	IEEE C37.73	IEEE Standard Requirements for Pad-Mounted Fused Switchgear
IEEE	IEEE C37.20.4	IEEE Standard for Indoor AC Switches (1 kV - 38 kV) for Use in Metal-Enclosed Switchgear
IEEE	IEEE 1312	IEEE Standard Preferred Voltage Ratings for Alternating-Current Electrical Systems and Equipment Operating at Voltages Above 230 kV Nominal
IEEE	IEEE C37.20.3	IEEE Standard for Metal-Enclosed Interrupter Switchgear Rated above 1 kV AC up to and Including 48.3 kV AC
IEEE	IEEE C37.20.9	IEEE Standard for Metal-Enclosed Switchgear Rated 1 kV to 52 kV Incorporating Gas Insulating Systems
IEEE	IEEE/IEC C37.60/62271-111	IEC/IEEE International Standard - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers for alternating current systems up to and including 38 kV
IEEE	IEEE 341	IEEE Standard Requirements for Capacitance Current Switching for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
IEEE	IEEE 316	IEEE Standard Requirements for Direct Current Instrument Shunts
IEEE	IEEE 1900.5	IEEE Standard for Policy Language Requirements and System Architectures for Dynamic Spectrum Access Systems
IEEE	IEEE 386	IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Rated 2.5 kV through 35 kV
IEEE	IEEE 48	IEEE Standard Test Procedures and Requirements for High-Voltage Alternating-Current Cable Terminations
IEEE	IEEE C37.59	IEEE Standard Requirements for Conversion of Power Switchgear Equipment
IEEE	IEEE/ANSI C37.85	American National Standard for Switchgear-Alternating-Current High-Voltage Power Vacuum Interrupters-Safety Requirements for X-Radiation Limits
IEC	IEC 62271-111	High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers for alternating current systems up to and including 38 kV
IEEE	IEEE/ANSI C92.2	American National Standard for Power Systems - Alternating-Current Electrical Systems and Equipment Operating at Voltages Above 230 kV Nominal-Preferred Voltage Ratings

IEEE C37.74-2014

IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV

IEEE C37.74-2014

Document Information

Terms of Service

Conditions of Use

Privacy Policy

Copyright

Communications

Privacy Policy

Cookie Notice