IEEE C62.39-2012

New IEEE Standard - Inactive-Reserved.

The basic requirements to be met by series connected, solid-state, self-restoring overcurrent protectors (OCPs) for the protection of telecommunication equipment and lines are presented.

This standard should be used for the harmonization of existing or future specifications issued by:

• solid-state, self-restoring OCP manufacturers,
• telecommunication equipment manufacturers,
• administrations, or
• network operators.

This standard sets terms, test methods, test circuits, measurement procedures and preferred result values for series connected, self-restoring current-limiter components used in low-voltage telecommunication circuit surge protection.

It is only applicable for components in telecommunications circuits with sinusoidal ringing voltages up to 150 V rms at 15 Hz to 70 Hz and dc powering voltages up to 400 V.

The self-restoring current limiters covered by this standard have the following properties:

• Excessive current causes a transition from a low-resistance state to a high-resistance state
• Reverts to a low-resistance state when the excessive current ends
• Directly operated by the current flow through the component
• Solid-state (no moving parts)
• Withstands specified levels of impulse
• Withstands specified ac voltage levels when in the high-resistance state

Examples of this type of current-limiter technology are positive temperature coefficient (PTC) stepfunction thermistors of ceramic or polymeric material and silicon semiconductor based electronic circuits.

This standard does not cover self-restoring current-limiter components used in other applications, such as heaters, inrush-current limiters, or sensing devices.

Current interrupting type components, which reduce the current to zero by a mechanical circuit break, are not covered by this standard.

In this standard, a telecommunications circuit is a circuit that uses metallic conductors to handle the remote transmission of information, such as data, communications, and signalling.

The test criteria and terms of this standard provide a means of component comparison and a common engineering language for users and manufacturers of self-restoring current-limiter components intended for use in low-voltage telecommunication circuit surge protection.

The test and measurement of low-voltage telecommunication (data, communications, and signalling) surge protectors is given in IEEE Std C62.36™ [B6].

This standard provides the corresponding component tests for the surge protector non-surge and active tests.