IPC-A-36-Gerber Files

Current Revision
Surface Insulation Resistance

Best Price Guarantee English 1 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
IPC by Global Electronics Association Logo

IPC-A-36-Gerber Files

Surface Insulation Resistance

IPC-A-36-Gerber Files
Surface Insulation Resistance
This double-sided test board has ten SIR test patterns which were designed for the IPC cleanliness test program, Phase 1 to examine the ability of a cleaning solvent to remove flux residues and the effects of entrapped residues under low standoff components. The PCB-B-36 test board can be used as a process qualification vehicle for the J-STD-001 which references IPC-9201. The test patterns consist of four comb patterns with 6 mil lines/spaces, two SMT pads 25 mil spaces, two inner perimeter patterns with 6 mil lines/spaces, and two outer perimeter patterns with 6 mil lines/spaces. The contact fingers of the board are normally gold plated for compatibility with edge card connectors with the remaining metallization of bare copper when used for qualification but can be other surface finishes. In most cases, four leadless ceramic chip carriers (LCCs) are mounted on the board, one in each quadrant. This test vehicle is designed to test combinations of conformal coatings, fluxes, solder paste and their interactions with each other as well as to test the removal of cleaning residues under low stand-off components. .
Loading...

Failed to load document history.

Publish Date Document Id Type View