ISO 19360:2016

Current Revision
Ships and marine technology - Marine cranes - Technical requirements for rigging applications

Best Price Guarantee Nov 15, 2016 English 1 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00

You own the digital copy of this edition

View in Library
or
International Organization for Standardization Logo

ISO 19360:2016

Ships and marine technology - Marine cranes - Technical requirements for rigging applications

PUBLISH DATE 2016
ISO 19360:2016

Rigging used for marine cranes is mainly wire rope rigging. ISO 19360:2016 specifies the technical requirements of the selection and application of running rigging and standing rigging used for wire rope rigging of marine cranes.

ISO 19360:2016 specifies the minimum requirements of the allowable strength and performance level for wire ropes of marine cranes according to the design, application and maintenance requirements of cranes.

ISO 19360:2016 specifies the implementation criteria of installation, maintenance, inspection and discards for running rigging and standing rigging of marine cranes.

ISO 19360:2016 is applicable to the following types of marine crane:

  • deck cranes mounted on ships for handling cargo or containers in harbour or sheltered water conditions;
  • floating cranes or grab cranes mounted on barges or pontoons for operating in harbour conditions or sheltered water conditions;
  • engine room cranes and provision cranes, etc. mounted on ships (including floating docks) for handling equipment and stores in harbour conditions.

ISO 19360:2016 does not apply to the following:

  • loads from accidents or collisions;
  • lifting operations below sea level;
  • cranes which are supposed to be included in the class of the vessel and where the vessel receives a crane class notation; the contents of this document may be used however, as recommendation or guidance;
  • other items where there is the danger that they might be considered in-scope are excluded from this document, such as
  • loose gear items, such as the hook block, and
  • ropes and fittings;
  • cranes which are to be included in class by the class society;
  • minimum ambient operating temperatures no less than −20 °C;
  • maximum ambient operating temperatures above +45 °C;
  • transport, assembly, dismantling and decommissioning of cranes;
  • lifting accessories, i.e. any item between the crane and the load;
  • lifting operations involving more than one crane;
  • hand powered cranes;
  • emergency rescue operations;
  • shore-side cargo handling cranes;
  • portable cranes on board;
  • lifting appliances for lifeboats, liferafts accommodation ladders and pilot ladders;
  • launching appliances for survival craft and rescue boats;
  • gangways, accommodation and pilot ladders and their handling appliances.
Loading...

Failed to load document history.

Publish Date Document Id Type View