| SAE |
SAE AMS3638 |
Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Pigmented, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio
|
|
| SAE |
SAE AMS3637 |
Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Clear, Flexible, Heat Shrinkable, 2 to 1 Shrink Ratio
|
|
| SAE |
SAE AMS3583 |
Plastic Tubing, Electrical Insulation, Crosslinked Polyvinyl Chloride, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio
|
|
| SAE |
SAE AMS3639 |
Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Clear, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio
|
|
| SAE |
SAE AMS3593 |
Tubing, Plastic, Electrical Insulation Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat-Shrinkable Marker Sleeving Grade Low Outgassing
|
|
| SAE |
SAE AMS3636 |
Tubing, Plastic, Electrical Insulation Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio
|
|
| SAE |
SAE AMS3683 |
Tubing, Irradiated Modified Fluoropolymer Plastic, Electrical Insulation Flame Resistant, Flexible, Heat-Shrinkable, 2 to 1 Shrink Ratio
|
|
| SAE |
SAE AMS3588 |
Plastic Tubing, Electrical Insulation Irradiated Polyolefin, Clear, Very Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio
|
|
| SAE |
SAE AMS3582 |
Plastic Tubing, Electrical Insulation Crosslinked Polyvinyl Chloride, Flexible Heat Shrinkable 2 to 1 Shrink Ratio
|
|
| IEC |
IEC 60684-3-228 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1" |
|
| SAE |
SAE AMS3587 |
Plastic Tubing, Electrical Insulation Irradiated Polyolefin, Pigmented, Very Flexible, Heat-Shrinkable Low Recovery Temperature 2 to 1 Shrink Ratio
|
|
| SAE |
SAE AMS3591 |
Polyethylene Terephthalate Plastic Tubing, Electrical Insulation, Thermally Welded, Heat Shrinkable, 1.6 to 1 Shrink Ratio
|
|
| SAE |
SAE AMS3623 |
Tubing, Irradiated Polychloroprene Elastomer, Electrical Insulation Flexible, Heat-Shrinkable, 1.750 to 1 Shrink Ratio
|
|
| SAE |
SAE AMSDTL23053/8 |
Insulation Sleeving, Electrical, Heat Shrinkable, Polyvinylidene Fluoride, Semi-Rigid, Crosslinked
|
|
| SAE |
SAE AS23053/8 |
INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYVINYLIDENE FLUORIDE, SEMI-RIGID, CROSSLINKED
|
|
| IEC |
IEC 60684-3-211 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1 |
|
| BSI |
BSI BS EN 60684-3-229 |
Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving -- Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
|
| IEC |
IEC 60684-3-229 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
|
| SAE |
SAE AMS3589 |
Plastic Tubing, Electrical Insulation, Resin Bonded-Polyethylene Terephthalate, Heat Shrinkable 1.3 to 1 Shrink Ratio
|
|
| SAE |
SAE AMS3634 |
Tubing, Polyolefin Plastic, Electrical Insulation Selectively Crosslinked, Semi-Rigid, Heat-Shrinkable
|
|
| SAE |
SAE AMS3579 |
Plastic Tubing, Electrical Insulation Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio
|
|
| SAE |
SAE AMS3633 |
Plastic Tubing, Electrical Insulation Irradiated Polyolefin, Heat Shrinkable
|
|
| SAE |
SAE AMS3625 |
Elastomeric Tubing, Electrical Insulation Crosslinked Silicone, Pigmented, Flexible, Heat-Shrinkable 1.750 to 1 Shrink Ratio
|
|
| BSI |
BSI BS EN 60684-3-248 |
Flexible insulating sleeving. Specifications for individual types of sleeving -- General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1 |
|
| IEC |
IEC 60684-3-248 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1 |
|