| BSI |
BSI BS EN 4318 |
Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Solution treated and precipitation treated, bar and section De ≤ 100 mm, Rm ≤ 960 MPaAerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Solution treated and precipitation treated, bar and section De ≤ 100 mm, Rm ≤ 960 MPaAerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Solution treated and precipitation treated, bar and section De ≤ 100 mm, Rm ≤ 960 MPa |
|
| SAE |
SAE AMS4094 |
Aluminum Alloy, Sheet and Plate, Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Sheet Solution Heat Treated, Cold Worked, and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
|
|
| SAE |
SAE AMS4311 |
Aluminum Alloy, Rolled or Forged Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352), Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
|
|
| SAE |
SAE AMS4310 |
Aluminum Alloy, Rolled or Forged Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651, 7075-T652), Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
|
|
| SAE |
SAE AMS5661 |
Nickel-Iron Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forging or Flash-Welded Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe (Alloy 901) Consumable Electrode Remelted or Vacuum Induction Melted Solution Heat Treated, Stabilized, and Precipitation Heat Treated
|
|
| BSI |
BSI BS 2L 83 |
Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9) |
|
| SAE |
SAE AMS4154 |
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T6510, 7075-T6511) Solution Heat Treated, Stress Relieved by Stretching when Required and Precipitation Heat Treated
|
|
| SAE |
SAE AMS4617 |
Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, 7075-T73511, 7075-T73510), Solution Heat Treated, Stress Relieved by Stretching when required, and Overaged
|
|
| BSI |
BSI BS EN 140401-803 |
Detail specification: Fixed low power film SMD resistors. Cylindrical. Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 |
|
| SAE |
SAE AMS4934 |
Titanium Alloy, Extrusions and Flash Welded Rings, 6Al - 4V, Solution Heat Treated and Aged
|
|
| SAE |
SAE AMS4304 |
Aluminum Alloy, Discontinuously Reinforced Sheet 2009/SiC/15w (T8P) Solution Heat Treated, Stretched, and Precipitation Heat Treated
|
|
| SAE |
SAE AMS4265 |
Aluminum Alloy, Particulate Reinforced Extrusions 6092/Sic/25p - T6p Solution Heat Treated, Quenched, and Precipitation Heat Treated
|
|
| SAE |
SAE AMS4323 |
Aluminum Alloy, Hand Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7452), Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
|
|
| SAE |
SAE AMS5940 |
Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings and Stock for Forging, Flash-Welded Rings and Heading, 34Co - 3.0Cr - 28Ni - 3.0Cb(Nb) - 5.5Al - 0.008B - 25.5Fe Multiple Melted, High Temperature, Oxidation-Resistant, Low Expansion, Solution Heat Treated, Precipitation-Hardenable (Alloy 783)
|
|
| SAE |
SAE AMS4933 |
Titanium Alloy Extrusions and Flash Welded Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized
|
|
| ASTM |
A645/A645M |
Standard Specification for Pressure Vessel Plates, 5 % and 5<fraction><num>1</num> <den>2</den></fraction> % Nickel Alloy Steels, Specially Heat Treated |
|
| SAE |
SAE AMS5755 |
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Rings and Forging and Flash-Welded Ring Stock 64Ni - 5.0Cr - 24.5Mo - 5.5Fe (Alloy W) Solution Heat Treated
|
|
| SAE |
SAE AMS4141 |
Aluminum Alloy Die Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated
|
|
| SAE |
SAE AMS4168 |
Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated, Unstraightened
|
|
| BSI |
BSI BS L 112 |
Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) |
|
| BSI |
BSI BS L 111 |
Specification for bars and extruded sections of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) |
|
| BSI |
BSI BS L 113 |
Specification for sheet and strip of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) |
|
| SAE |
SAE AMS5355 |
Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
|
|
| SAE |
SAE AMS4225 |
Aluminum Alloy, Heat-Resistant, Castings 5.0Cu - 1.5Ni - 0.25Mn - 0.25Sb - 0.25Co - 0.20Ti - 0.20Zr (203.0-T6) Solution Heat Treated and Precipitation Heat Treated
|
|
| BSI |
BSI BS EN 4060 |
Aerospace series. Filler rods and filler wires for welding in heat resisting alloys. Diameter 0,5 mm ≤ D ≤ 5,0 mm. Dimensions |
|