| BSI |
BSI DD CEN/TS 13130-18 |
Materials and articles in contact with foodstuffs. Plastics substances subject to limitation -- Determination of 1,2-dihydroxybenzene, 1,3-dihydroxybenzene, 1,4-dihydroxybenzene, 4,4'-dihydroxybenzophenone and 4,4'- dihydroxybiphenyl in food simulants |
|
| BSI |
BSI BS 3531-23.2 |
Implants for osteosynthesis. Bone plates -- Specification for holes and slots for use with screws of 4,5 mm, 4,2 mm, 4,0 mm, 3,9 mm, 3,5 mm and 2,9 mm nominal sizes |
|
| ASTM |
D6065 |
Standard Practice for Handling, Transportation, and Storage of HFC-227ea 1,1,1,2,3,3,3-Heptafluoropropane (CF<inf>3</inf>CHFCF<inf>3</inf>) |
|
| ASTM |
D6064 |
Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF<inf>3</inf >CHFCF<inf>3</inf>) |
|
| ISO |
ISO 2699 |
Diesel engines - Flange-mounted fuel injectors, size S - Types 2, 3, 4, 5 and 6 |
|
| ASTM |
D5836 |
Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method) |
|
| ASTM |
D6427/D6427M |
Standard Practice for Handling, Transportation, and Storage of HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane (CF<sub>3</sub>CH<sub>2</sub>CF<sub>3</sub>) |
|
| ASTM |
D6541 |
Standard Specification for HFC-236fa, 1,1,1,3,3,3–Hexafluoropropane, (CF<inf>3</inf >CH<inf>2</inf>CF<inf>3</inf>) |
|
| ASTM |
D6427 |
Standard Practice for Handling, Transportation, and Storage of HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane (CF<inf>3</inf>CH<inf>2</inf>CF<inf>3</inf>) |
|
| ASTM |
E2517 |
Standard Specification for Cargo Bed Cover, Type III (M35A2, 2<fraction><num>1</num><den >2</den></fraction> Ton Cargo Truck/M1078, 2<fraction><num>1</num><den >2</den></fraction> Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2<fraction><num>1</num><den>2</den></fraction> Ton LMTV Trailer) |
|
| ISO |
ISO 500-1 |
Agricultural tractors - Rear-mounted power take-off types 1, 2, 3 and 4 - Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone |
|
| ISO |
ISO 500-3 |
Agricultural tractors - Rear-mounted power take-off types 1, 2, 3 and 4 - Part 3: Main PTO dimensions and spline dimensions, location of PTO |
|
| IEC |
IEC 60502-1 |
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) |
|
| IEC |
IEC 60684-3-248 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1 |
|
| ASTM |
D5932 |
Standard Test Method for Determination of 2,4-Toluene Di<emph type="bdit">iso</emph >cyanate (2,4-TDI) and 2,6-Toluene Di<emph type="bdit">iso</emph>cyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace |
|
| BSI |
BSI BS QC 222400 |
Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 5,6 mm (0,22 in). Characteristic impedance 75 ohms (type 1,6/5,6). Characteristic impedance 50 ohms (type 1,8/5,6) with similar mating dimensions |
|
| BSI |
BSI BS EN 60684-3-248 |
Flexible insulating sleeving. Specifications for individual types of sleeving -- General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1 |
|
| IEC |
IEC 61067-3-1 |
Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Type 1, 2 and 3 tapes |
|
| SAE |
SAE AS63 |
CARBURETOR FLANGE, AIRCRAFT 4 BOLT - SINGLE BARREL - NO. 2, 3, 4, 5, 7 AND 9
|
|
| BSI |
BSI BS EN 16913 |
Ambient air. Standard method for measurement of NO<sub>3</sub><sup>-</sup>, SO<sub>4</sub><sup>2-</sup>, Cl<sup>-</sup>, NH<sub>4</sub><sup>+</sup>, Na<sup>+</sup>, K<sup>+</sup>, Mg<sup>2+</sup>, Ca<sup>2+</sup> in PM2,5 as deposited on filters |
|
| BSI |
BSI BS ISO 500-1 |
Agricultural tractors. Rear-mounted power take-off types 1, 2, 3 and 4 -- General specifications, safety requirements, dimensions for master shield and clearance zone |
|
| BSI |
BSI BS ISO 500-3 |
Agricultural tractors. Rear-mounted power take-off types 1, 2, 3 and 4 -- Main PTO dimensions and spline dimensions, location of PTO |
|
| ISO |
ISO 7650 |
Commercial vehicles and buses - Mounting dimensions for starter motors of types 1, 2, 3 and 4 |
|
| BSI |
BSI DD CEN/TS 13130-27 |
Materials and articles in contact with foodstuffs. Plastics substances subject to limitation -- Determination of 2,4,6-triamino-1,3,5-triazine in food simulants |
|
| IEC |
IEC 60724 |
Short-circuit temperature limits of electric cables with rated voltages of 1 kV (<i>U</i><sub>m</sub> = 1,2 kV) and 3 kV (<i>U</i><sub>m</sub> = 3,6 kV) |
|