SAE J2665 (DEC2018)

Current Revision

Test Procedure to Measure the Fuel Permeability of Materials by the Cup Weight Loss Method

Best Price Guarantee Dec 12, 2018 English 9 Pages

PDF Instant Access $95.00 Print Copy Ships in 2-5 Days Quantity: 1 $95.00 Bundle Save 10% Ships in 2-5 Days $171.00

Sub Total (1 Item(s)) $ 0.00

Estimated Shipping $ 0.00

Total (Pre-Tax) $ 0.00

SAE J2665 (DEC2018)

Name: SAE J2665 (DEC2018) – Test Procedure to Measure the Fuel Permeability of Materials by the Cup Weight Loss Method
Brand: SAE International
SKU: SAE J2665 (DEC2018)
Price: 95.00 USD
Availability: InStock

Test Procedure to Measure the Fuel Permeability of Materials by the Cup Weight Loss Method

PUBLISH DATE 2018

PAGES 9

SAE J2665 (DEC2018)

This test standard covers the procedure for measuring the permeation of fuel or fuel surrogates through test samples of elastomeric, plastic or composite materials, up to about 3 mm thick.

The method involves:

Filling a test cup with the test fluid (fuel or fuel surrogate).
Sealing test sample over the open end of the cup.
Placing the sealed container into an oven at the desired test temperature.
Measuring the weight loss over time.

Permeation rates are calculated from the rate of weight loss and the exposed area of the test sample.

Standard permeation test temperatures are 40 °C and 60 °C. Standard test fluids are Fuel C, Fuel CE10 and Fuel CM15. Other fluids, such as Fuel CMTBE15, and other volatile liquids may be tested according to this procedure as desired (SAE J1681).

The method is not applicable for measuring permeation of higher boiling materials that will not completely evaporate from the exterior surface of the sample at the test temperature.