Historical Revision

IEEE 1307-1996

IEEE Standard for Fall Protection for Electric Utility Transmission and Distribution on Poles and Structures

Online PDF

$130.00

Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00

I have read and agree to the Terms & Conditions

IEEE 1307-1996

IEEE Standard for Fall Protection for Electric Utility Transmission and Distribution on Poles and Structures

PUBLISH DATE 1996

PAGES 40

IEEE 1307-1996

Document Information

New IEEE Standard - Superseded. General recommendations for fall protection and worker protection are provided. Sufficient details of the methods, equipment, and training requirements necessary to provide safe and adequate procedures for personnel working at elevated worksites are presented.

This guide provides general recommendations for a fall protection program for substation and generation structures and equipment, communication [including Community Antenna Television (CATV)], transmission, and distribution structures. It is not intended to include all of the proven practical methods and procedures; however, these selected comprehensive recommendations are based on sound engineering principles, engineering safety considerations, and research into the tools, methods, practices, and training provided to and by electric power and communications workers. This guide applies to electric distribution, transmission, and generation work, communications work (including CATV), line clearance tree trimming work (tree work performed from an aerial lift device or from a ladder), and structure painting. It does not include work in vaults, manholes, or other confined spaces. Requirements regarding floors and similar surfaces, stairways, guardrail systems, and scaffolding of all types are not considered in this guide.

The purpose of this guide is to provide emphasis to encourage further development in equipment, work methods, and training relating to fall protection programs within the utility industry. This guide provides recommendations to allow qualified climbers latitude to climb about unattached on a structure while requiring non-qualified climbers to be attached by a fall protection system.


SDO	IEEE: Institute of Electrical and Electronics Engineers
Document Number	1307
Publication Date	Oct. 8, 1996
Language	en - English
Page Count	40
Revision Level
Supercedes
Committee	Transmission and Distribution

Publish Date	Document Id	Type
Nov. 27, 2018	1307-2018	Revision
Jan. 30, 2009	1307-2004	Revision
Oct. 8, 1996	1307-1996	Revision

SDO	Document	Title
CSA	CSA B352.0	Roll-over protective structures (ROPS), falling object protective structures (FOPS), operator protective structures (OPS), and tip-over protective structures (TOPS) for mobile machinery - General Canadian requirements
IEEE	IEEE 487.4	IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Neutralizing Transformers
IEEE	IEEE 487	IEEE Standard for the Electrical Protection of Communications Facilities Serving Electric Supply Locations -- General Considerations
IEEE	IEEE 487.3	IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Hybrid Facilities
IEEE	IEEE 487.2	IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations through the Use of Optical Fiber Systems
IEEE	IEEE 487.1	IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of On-Grid Isolation Equipment
IEEE	IEEE 487.5	IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Isolation Transformers
IEEE	IEEE 1835	NACE International and IEEE Joint Standard Practice for Atmospheric (Above Grade) Corrosion Control of Existing Electric Transmission, Distribution, and Substation Structures by Coating Systems
IEEE	IEEE 317	IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations
IEEE	IEEE 1815	IEEE Standard for Electric Power Systems Communications-Distributed Network Protocol (DNP3)
AMPP	NACE SP0315-IEEE Std 1835	NACE International and IEEE Joint Standard Practice for Atmospheric (Above Grade) Corrosion Control of Existing Electric Transmission, Distribution, and Substation Structures by Coating Systems
IEEE	IEEE 310	IEEE Standard for Reference-Standard Electrical Resistors
IEEE	IEEE 802.16/Conformance02	IEEE Standard for Conformance to IEEE Standard 802.16 - Part 2: Test Suite Structure and Test Purposes (TSS&TP) for 10-66 GHz WirelessMAN-SC Air Interface
IEEE	IEEE 2600.3	IEEE Standard Protection Profile for Hardcopy Devices in IEEE Std 2600-2008 Operational Environment C
IEEE	IEEE 2600.4	IEEE Standard Protection Profile for Hardcopy Devices in IEEE Std 2600(TM)-2008 Operational Environment D
IEEE	IEEE 2600.2	IEEE Standard Protection Profile for Hardcopy Devices in IEEE Std 2600-2008 Operational Environment B
IEEE	IEEE 1685	IEEE Standard for IP-XACT, Standard Structure for Packaging, Integrating, and Reusing IP within Tool Flows
IEEE	IEEE C57.12.70	IEEE Standard for Standard Terminal Markings and Connections for Distribution and Power Transformers
IEEE	IEEE 1076/INT	IEEE Standards Interpretations: IEEE Std 1076-1987, IEEE Standard VHDL Language Reference Manual
IEEE	IEEE C135.61	IEEE Standard for the Testing of Overhead Transmission and Distribution Line Hardware
IEEE	IEEE 2950	IEEE Standard for Electric Traction System for High-Speed Electric Multiple Units (EMUs)
IEEE	IEEE 3101	IEEE Standard for Fiber Optic Distributed Acoustic Sensing (DAS) Interrogator Standard--Terminology and Definitions
SAE	SAE J1119	Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS)
IEEE	IEEE 141	IEEE Recommended Practice for Electric Power Distribution for Industrial Plants (IEEE Red Book)
IEEE	IEEE C37.45	American Standard Specifications for Distribution Enclosed Single Pole Air Switches

IEEE 1307-1996

IEEE Standard for Fall Protection for Electric Utility Transmission and Distribution on Poles and Structures

IEEE 1307-1996

Document Information

Terms of Service

Conditions of Use

Privacy Policy

Copyright

Communications

Privacy Policy

Cookie Notice