IEC 61191-6 Ed. 1.0 b:2010

Current Revision
Printed board assemblies - Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA and measurement method

Best Price Guarantee Jan 1, 2010 EN/FR 80 Pages

Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00
View in Library
or
International Electrotechnical Commission Logo

Printed board assemblies - Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA and measurement method

PUBLISH DATE 2010
PAGES 80

Printed board assemblies - Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA and measurement method

IEC 61191-6:2010 specifies the evaluation criteria for voids on the scale of the thermal cycle life, and the measurement method of voids using X-ray observation.

This part of IEC 61191 is applicable to the voids generated in the solder joints of BGA and LGA soldered on a board. This part of IEC 61191 is not applicable to the BGA package itself before it is assembled on a board.

This standard is applicable also to devices having joints made by melt and re-solidification, such as flip chip devices and multi-chip modules, in addition to BGA and LGA.

This standard is not applicable to joints with under-fill between a device and a board, or to solder joints within a device package.

This standard is applicable to macrovoids of the sizes of from 10 ¦m to several hundred micrometres generated in a soldered joint, but is not applicable to smaller voids (typically, planar microvoids) with a size of smaller than 10 ¦m in diameter.

This standard is intended for evaluation purposes and is applicable to research studies, off-line production process control and reliability assessment of assembly.

Loading...

Failed to load document history.

Publish Date Document Id Type View